ELECTROLYSERS

Product Details:

Single Cell 25cm2
We are Engaged in Offering a Wide range of quality Products to our clients our Products are really Appreciated by our clients

Additional Information:

• Production Capacity: 50
• Delivery Time: 10 to 20 days

Product Details:

A Proton Exchange Membrane (PEM) water electrolyzer with a hydrogen production rate of 500 ml/min is suitable for laboratory, educational, or small-scale industrial applications.

Hydrogen Production Rate: 0–500 ml/min
Hydrogen Purity: ≥99.999%
Output Pressure: 0.02–0.4 MPa
Input Power: <200 W
Power Supply: AC 220/110 V, 50–60 Hz
Water Quality Requirement: Deionized or distilled water with resistivity >1 MΩ·cm
Dimensions: 420 × 227 × 352 mm
Weight: Approximately 24 kg (including packaging)
Technology: PEM (Proton Exchange Membrane)

Additional Information:

• Item Code: 30LPHPEMElectrolyser
• Production Capacity: 10
• Delivery Time: 20 Days
• Packaging Details: 30 LPH PEM Electrolyser

Product Details:

An AEM electrolyser uses an anion exchange membrane to transport hydroxide ions (OH⁻) from the cathode to the anode. This enables water electrolysis in alkaline conditions—offering a more cost-effective and potentially safer alternative to PEM (Proton Exchange Membrane) electrolysis, since it avoids the need for expensive noble metals.

Active Area:

• 25 cm² (typically 5 cm x 5 cm)
• Represents the area of the membrane where electrochemical reactions occur.

Main Components:

1. Anion Exchange Membrane (AEM):
   • Conducts OH⁻ ions.
   • Examples: Sustainion®, Fumasep FAA, PiperION™, etc.
   • Chemically stable in alkaline environments.
2. Electrodes:
   • Cathode: Usually made of nickel-based materials or stainless steel coated with non-precious metal catalysts (e.g., NiFe, NiMo).
   • Anode: Often nickel foam or nickel-mesh with transition metal oxides (e.g., NiFeOx, CoOx).
   • May include a gas diffusion layer (GDL) for uniform gas management.
3. Flow Fields / Plates:
   • Distribute electrolyte and gases evenly.
   • Often made of chemically resistant plastic, stainless steel, or coated metal.
   • Designed to promote even water and gas flow.
4. Gaskets and Seals:
   • Prevent leakage.
   • Chemically resistant (e.g., PTFE, silicone).
5. Endplates and Compression Hardware:
   • Maintain consistent pressure.
   • Often made of stainless steel or anodized aluminum.

Additional Information:

• Item Code: AEM25
• Production Capacity: 3 LPH
• Delivery Time: 10 to 15 days

Product Details:

An AEM electrolyzer uses an anion exchange membrane to produce hydrogen from water using electricity. Unlike PEM (Proton Exchange Membrane) electrolyzers, AEM systems operate in alkaline conditions, enabling the use of non-precious metal catalysts (e.g., nickel instead of platinum) and cheaper materials.

A 500 mL/min capacity means it produces 0.5 liters of hydrogen gas per minute at standard temperature and pressure (STP) – roughly 0.045 Nm³/h, or about 3.75 liters per hour.

Additional Information:

• Production Capacity: 10
• Delivery Time: 20days

Product Details:

Additional Information:

• Production Capacity: 50
• Delivery Time: 15 Days